GENERAL INSTRUCTIONS FOR USING Restore-X® PRODUCTS (part 1)


  1. READ LABEL DIRECTIONS ON ALL CONTAINERS CAREFULLY and note specific instructions for Restore-X® EFR, Deck Cleaner and Wood Brightener contained in this guide.

Restore-X deck products

  1. Conduct several small test samples in inconspicuous areas (one foot square). It is essential to conduct several tests in different areas, as the condition of the surface will vary depending on the extent of exposure to the elements. Monitor the time it takes and the amount of product used to achieve satisfactory results.  This test sample will help you bid the job accurately and schedule the amount of time necessary to complete the project.

 

  1. Materials and equipment: Having the proper materials and equipment available before applying Restore-X® will help ensure the success of your project. Your experience will bear this out. The following items are highly recommended:
  • Rubber Gloves and Boots
  • Eye Protection (goggles)
  • High-Pressure Washer, Hoses, etc.
  • Duct Tape and Plastic (to protect  aluminum)
  • Synthetic Rollers and Brushes only
  • All Stainless Steel Airless Sprayer
  • Sprayer for Deck Cleaner or Wood  Brightener (pump-up garden Type)
  • Respirators (only if Restore-X® is  sprayed)

Sprayer Equipment: Airless spray equipment is recommended for Deck Cleaner and Wood Brightener.  All Internal sprayer parts (fluid section) must be stainless steel, Teflon, plastic, or nylon. DO NOT USE Restore-X® in spray equipment (fluid section) with aluminum alloy or leather internal parts or packings.  CAUTION: Do not pump Restore-X® through old paint lines!  Residual paint remaining in the hose will be sloughed off and will clog the spray tip.

 

Leave a Reply